Guangzhou Geemblue Environmental Equipment Co., Ltd.
Specilize in Water Treatment & Disinfection Technology
Add to Cart
60L/H PH 7 Salt Base Portable Hypochlorous Acid Generator Manual Control
Introduction
Hypochlorous acid generator is a system which is produced by electrolysis of tap water through water purification system and is produced by a special electrolytic cell. The system produce hypochlorous acid (HCLO) with pH (5~6.5), redox potential (ORP value +750mv or more) and available chlorine (50~60mg/L), also produce sodium hydroxide (NaOH) with PH (10~12), redox potential(ORP value -800~900 mv).
Principle of electrolysis
Hypochlorous acid generator electrolyzes 0.1% of NaCl solution in a special electrolytic module. In the advanced anion membrane, the acid oxidation potential water is generated from the anode side and the alkaline reduction potential is generated from the cathode side. Most of the alkaline water will enter the anode chamber twice, and after the second electrolysis, the slightly acidic electrolytic ion water will be generated from the anode side. A small amount of alkaline water will be generated from cathode side.
The slightly acidic water (HClO) produced by electrolysis diluted brine, with high redox potential and excellent germicidal ability, and it contains no chemical additives. The slightly acidic electrolyzed water is a solution with high safety, no residue and environmentally friendly.
Applications:
• Storing and sanitation of fish and seafood at harvest.
• Dosing into the process water.
• Generating sanitized ice for storing and transporting.
• Employee hand and feet sanitation entering the facilities.
• Sanitation of processing tools and equipment.
• Sanitation of floors and food contact surfaces.
• Dislodging bioflim and sanitizing pipes and closed systems.
Specifications
| Model | GBW-60L-HCLO | |
| Slightly acidic water(HClO) output | 60L/h | |
| Concentration of HClO | 150~200 ppm | |
| PH of Slightly acidic water | 5~6.5 | |
| ORP of Slightly acidic water | ≥+750mv | |
| Alkaline water(NaOH) output | 20L/h | |
| PH of Alkaline water | 10~12 | |
| ORP of Alkaline water | -800~900mv | |
| Salt consumption | 5g per liter HOCl | |
| Water consumption | 1.2 liter per liter HOCl | |
| Power consumption | 8watt per liter HOCl | |
| feed water | flow rate | > 100L/hour |
| pressure | 2~4 bar | |
| Working environment requirements | Room temperature | 5~35°C |
| Relative humidity | ≤80% | |
| Power distribution requirements | AC | 220V |
| power | ≥ 800W | |
Project reference:
